• Positive, forced-air circulation maintains temperature uniformity throughout
  • Directional airflow assures quick recovery after door is opened
  • High-density, CFC-free urethane foam insulation protects cabinet from ambient temperature fluctuations and minimizes operating costs
  • Heavy-duty, industrial-grade, hermetically sealed compressor
  • Automatic condensate removal and defrost

Microprocessor Control

Digital electronic technology designed to simplify operation and deliver greater accuracy
Factory-preset temperature setpoint at 4 C
Adjustable temperatures between 1 and 8 C
Icon-based controls
Large, easy-to-read digital display that shows temperature within 0.1 C
Graphic thermometer shows steady green when temperature is normal, flashes top bar for overtemperature, flashes bulb for undertemperature
Sensor automatically initiates defrost cycle on demand, eliminating need for a defrost timer, minimizing frost buildup, and optimizing coil efficiency

Safety and Security

Audible/visual warnings for temperature deviations or power failure
Key-operated ON/OFF/ALARM ON master switch for setpoint security
Pushbutton alarm test and remote alarm contacts
Alarm silence, ringback and auto reset
Controller battery backup system
Alarm setpoints are preset to warn of temperature deviation at 5.5 C overtemperature, 1.5 C undertemperature






Cold-rolled steel cabinet with smooth, scratch-resistant painted finish for easy cleaning
Lockable doors self-close against closed-cell peripheral gasket
Dual-pane glass viewing door insulated to prevent condensation
Adjustable, full-extension, stainless-steel drawers
Interior cabinet lights
Door-activated ON/OFF switch and independent switch on panel
Adjustable leveling feet
Includes 6 in. (15.2cm) 7-day temperature chart recorder






Meet UL, CUL, and CE requirements for safety and performance


  • Setpoint Security: Key-operated triple position switch for main power and alarm; locks in temperature and alarm setpoints to minimize setpoint error and prevent tampering
  • Power Failure Icon: Illuminated when main power is interrupted
  • Service Required: Illuminated when controller is in programming mode, or if simulated warm or cold conditions fail to occur during alarm test function
  • Touchpad Data Entry: Increases or decreases setpoint values in programming mode
  • Audible Alarm: Audible and visual indicators are activated in the event of warm, cold or power loss conditions. Mute will silence audible alarm with 6 minute ring back interval; display remains flashing
  • Touchpad Scan: Changes main display; also used to access various programming and service functions (alarm mute, recall 6 minutes)
  • Alarm Test: Pressing "up" and "scan" buttons creates simulated overtemperature and undertemperature condition and activates audible and visual alarms; display flashes momentarily when test is complete
  • Battery Backup: Continuous charge provides full alarm function in case of power failure. Low Battery Alarm Illuminated when the alarm system battery backup charge is low
  • Digital Display: Resolution to within 0.1 C, indicates cabinet temperature during normal operation, flashes during alarm condition or setpoint adjustment, displays other values with touchpad sequence
  • Door Ajar: Illuminated when door is left open and alarm is in "active" mode.
  • Graphic Thermometer: Easy to view, shows normal, high or low temperature condition; steady green for normal, flashing top bar for overtemperature, flashing bulb for undertemperature


  • Bestandsomschrijving
  • reb404-v-34-1470381427
    2 MB

Product Info

133 liters

Product specifications

Exterior depth
660 mm
Exterior width
610 mm
Exterior height
850 mm
Shippingweight Net
75 kg
Shippingweight Gross
100 kg
single, solid
Temperature Range
1° to 8°C
Interior depth
520 mm
Interior width
508 mm
Interior height
508 mm
Electrical voltage
Shelves: Full
Shelves: Half